H3C S7500E Series Ethernet Switches Installation Manual

About This Manual
Organization
H3C S7500E Series Ethernet Switches Installation Manual is organized as follows:
Chapter Contents
1 Product Overview
Introduces the H3C S7500E Series Ethernet
Switches in terms of chassis, SRPUs, LPUs,
power supply, and fan tray.
2 Installation Preparations
Specifies the installation requirements of the H3C
S7500E Series Ethernet Switches and presents
installation precautions.
3 Hardware Installation
Introduces how to install the H3C S7500E Series
Ethernet Switches and how to connect the power
supply, ground cables, and the console cable.
4 System Commissioning
Introduces the startup process of the H3C S7500E
Series Ethernet Switches, including power-on and
system initialization.
5 Hardware Maintenance
Introduces how to install and remove power
modules, cards, fans, mounting ears, cable
management bracket, CF card, and air filters of the
H3C S7500E Series Ethernet Switches.
6 Software Maintenance
Introduces how to load and upgrade the software
of the H3C S7500E Series Ethernet Switches.
7 Troubleshooting
Introduces how to troubleshoot the configuration
system, power modules, fans, and LPUs of the
H3C S7500E Series Ethernet Switches.
Appendix A List of Pluggable
Modules
Introduces pluggable modules for different types of
ports and their related parameters.
Appendix B AC Power Cables
Used in Different Countries or
Regions
Introduces AC power cables used in different
countries or Regions, including 10A AC power
cables and 16A AC power cables.
Appendix C Compliance and
safety manual
Provides Compliance and safety manual