H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-24
VI. RESET button
A reset button is provided on the LSQ1MPUA0 for you to reset the card when
necessary.
1.3.3 Dedicated S7503E-S SRPU-LSQ1CGP24TSC0
I. Applicable model
S7503E-S
II. Technical specifications
Table 1-23 Technical specifications of the LSQ1CGP24TSC0
Item Specifications
CPU MIPS64, 400 MHz
Boot ROM 512 KB
Flash memory 64 MB
DDR SDRAM 512 MB
Dimensions (H × W × D) 45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)
Ports
z Twenty-four
1000Base-X-SFP/100Base-FX-SFP ports, eight
of which can form eight Combo ports with the
eight 10/100/1000Base-T GE ports
z One console port, used for local or remote
configuration and management of the switch
through a dialup connection
z One 10/100Base-TX port for management and
upgrade
Power consumption 25 W to 45 W
III. Panel and LEDs
Table 1-19 shows the front panel of the LSQ1CGP24TSC0.
（1）
（2）
（3）
（4）
（5）
（6）
（7）
(1) GE/FE SFP optical ports (2) Combo ports
(3) Console port
(4) 10/100Base-TX Ethernet management
port and its LEDs
(5) Power and fan tray status LEDs (6) LPU status LEDs
(7) RESET button
Figure 1-19 Front panel of the LSQ1CGP24TSC0