H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual

H3C S7500E Series Ethernet Switches Chapter 1 Product Overview

1-28

Table 1-31 Description of the fan status LEDs

LED Description

z ON: The fans operate normally.

z OFF: The fans are faulty or out of position.

FAIL

z ON: The fans are faulty or out of position.

z OFF: The fans operate normally.

z LPU status LEDs (SLOT0, SLOT1, and SLOT2)

SLOT0, SLOT1, and SLOT2: The LPU status LEDs indicate the status of the LPUs

seated in these three slots.

Table 1-32 Description of LPU status LEDs

LED Description

RUN

z ON/OFF: The LPU is faulty or out of position.

z Blinking: The LPU is operating normally.

ALM

z OFF: The LPU is operational or out of position.

z ON: The LPU is faulty.

 Note:

If the RUN LED flashes at a high frequency, the card is in the startup process, but is not

operational yet. At system startup, the ALM LED will be ON for a while, but it does not

mean that the card is faulty.

VI. RESET button

A reset button is provided on the LSQ1CGP24TSC0 for you to reset the card when

necessary.

1.3.4 Salience VI-10GE SRPU-LSQ1SRP2XB0

I. Applicable models

z S7503E

z S7506E

z S7510E

z S7506E-V