H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-30
Table 1-34 Description of the CFS LED
Status Description
OFF No CF card is in position.
ON The CF card is in position.
z 10GBase-R-XFP Ethernet ports
Table 1-35 Specifications of the 10GBase-R-XFP Ethernet ports
Item Specifications
Connector type LC
Number of interfaces 2
Interface standard 10GBase-R
Applicable fiber module Refer to “Appendix A List of Pluggable Modules.”
Table 1-36 describes the status LEDs of 10GBase-R-XFP Ethernet ports.
Table 1-36 Description of the status LEDs of 10GBase-R-XFP Ethernet ports
LED Description
LINK
z OFF: No link is present.
z ON: A link is present.
ACT
z OFF: No data is being transmitted or received.
z Blinking: Data is being transmitted or received.
z Console port
Using an RJ-45 connector, the console port can be connected through a regular
asynchronous serial cable directly to a computer for system debugging, configuration,
maintenance, management, and host software loading, or to a modem for remote
system debugging, configuration, maintenance and management.
Table 1-37 Specifications of the console port
Item Specifications
Connector type RJ-45
Number of connectors 1
Interface standard Asynchronous EIA/TIA-232
Baud rate 115,200 bps (defaulting to 9,600 bps)
Transmission distance 15 m (49.21 ft.)