H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-34
IV. On-board interfaces
z CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you
can store host software and logs, and thus upgrade software conveniently. The CF card
is hot swappable.
Table 1-44 describes the CFS LED on the right of the CF card.
Table 1-44 Description of the CFS LED
Status Description
OFF No CF card is in position.
ON The CF card is in position.
z Console port
Using an RJ-45 connector, the console port can be connected through a regular
asynchronous serial cable directly to a computer for system debugging, configuration,
maintenance, management, and host software loading, or to a modem for remote
system debugging, configuration, maintenance and management.
Table 1-45 Specifications of the console port
Item Specifications
Connector type RJ-45
Number of connectors 1
Interface standard Asynchronous EIA/TIA-232
Baud rate 115,200 bps (defaulting to 9,600 bps)
Transmission distance 15 m (49.21 ft.)
Functions
z It can be connected to an ASCII terminal.
z It can be connected to the serial port of a
local or remote (through a pair of modems)
PC running terminal emulation program.
z 10/100BasE-TX management Ethernet port
Using an RJ-45 connector, the 10/100Base-TX management Ethernet port can be
connected to a local PC for switch program loading and switch debugging, or
connected to a remote NMS for remote management.