H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-37
II. Technical specifications
Table 1-51 Technical specifications of LSQ1SRP1CB0
Item Specifications
CPU MIPS64, 600 MHz
Boot ROM 512 KB
Flash memory 64 MB
DDR SDRAM 512 MB
Card physical
dimensions (H x W x D)
45.1 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)
Interfaces
z One CF card slot
z One console port, used for local or remote
configuration and management of the switch through
a dialup connection
z One 10/100Base-TX management Ethernet port
Power consumption 53 W to 60 W
III. Panel and LEDs
Figure 1-22 shows the front panel of the LSQ1SRP1CB0.
(1) (2) (3) (4) (5)
(7)
(6)
(1) CF card slot and CFS LED (2) Console port
(3) 10/100Base-TX Ethernet port for management and LEDs
(4) Power and fan status LEDs (5) LPU status LEDs
(6) ACTIVE LED of LSQ1SRP1CB0 (7) RESET button
Figure 1-22 Front panel of the LSQ1SRP1CB0
IV. On-board interfaces
z CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you
can store host software and logs, and thus upgrade software conveniently. The CF card
is hot swappable.
Table 1-52 describes the CFS LED on the right of the CF card.