H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-42
Table 1-60 Specifications of the console port
Item Specifications
Connector type RJ-45
Number of connectors 1
Interface standard Asynchronous EIA/TIA-232
Baud rate 115,200 bps (defaulting to 9,600 bps)
Transmission distance 15 m (49.21 ft.)
Functions
z It can be connected to an ASCII terminal.
z It can be connected to a serial port of a local or
remote (through a pair of modems) PC running
terminal emulation program.
z 10/100Base-TX management Ethernet port
Using an RJ-45 connector, the 10/100Base-TX management Ethernet port can be
connected to a local PC for switch program loading and switch debugging, or
connected to a remote NMS for remote management.
Table 1-61 Specifications of the 10/100Base-TX management Ethernet port
Item Specifications
Connector type RJ-45
Number of interfaces 1
Interface speed 10/100 Mbps, half/full duplex
Cable medium and maximum
transmission distance
Category-5 twisted pair, with a maximum
transmission distance of 100 m (328.08 ft.)
Function
Used for switch software upgrade and network
management
Table 1-62 describes the status LEDs of the 10/100Base-TX management Ethernet
port.
Table 1-62 Description of the status LEDs of the 10/100Base-TX management
Ethernet port
LED Description
LINK
z OFF: No link is present.
z ON: A link is present.
ACT
z OFF: No data is being transmitted or received.
z Blinking: Data is being transmitted or received.