H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-44
 Note:
If the RUN LED flashes at a high frequency, the card is in the startup process, but is not
yet operational. At system startup, the ALM LED will be ON for a while, but it does not
mean that the card is faulty.
z ACTIVE LED
The ACTIVE LED shows the active/standby status of the LSQ1MPUB0. If the ACTIVE
LED is ON, the LSQ1MPUB0 is active; if OFF, the LSQ1MPUB0 is standby.
VI. RESET button
A reset button is provided on the LSQ1MPUB0 for you to reset the card when
necessary.
1.3.8 Salience VI-Plus SRPU-LSQ1SRPD0
I. Applicable models
z S7503E
z S7506E
z S7510E
z S7506E-V
II. Technial specifications
Table 1-66 Technical specifications of the LSQ1SRPD0
Item Specifications
CPU MIPS64, 600 MHz
Boot ROM 512 KB
Flash memory 64 MB
DDR SDRAM 512 MB
Dimensions (H x W x D) 45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)
Interfaces
z One CF card slot
z One console port, used for local or remote
configuration and management of the switch through
a dialup connection
z One 10/100Base-TX management Ethernet port
Power consumption 50 W to 60 W