H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-53
II. Panel and LEDs
Figure 1-26 LSQ1FP48SA0 panel
Each 100M Ethernet optical port has a green LED.
Table 1-84 describes the LED.
Table 1-84 Description of the LED of each port on the LSQ1FP48SA0 panel
LED Description
LINK/ACT
z OFF: No link is present.
z ON: A link is present.
z Blinking: Data is being transmitted or received.
1.4.2 LSQ1FV48SA0
I. Introduction
The LSQ1FV48SA0 provides forty-eight 10/100M auto-sensing Ethernet electrical
ports and can be upgraded to support the PoE function.
Table 1-85 Technical specifications of the LSQ1FV48SA0
Item Specifications
CPU MIPS64, 400 MHz
Boot ROM 512 KB
DDR SDRAM 512 MB
Dimensions (H × W × D) 40 × 377 × 355 mm (1.57 × 14.84 × 13.98 in.)
Power consumption 30 W to 35 W
Connector type RJ-45
Number of ports 48
Interface speed
z 10/100 Mbps, half/full duplex
z MDI/MDI-X auto-sensing
Cable medium and maximum
transmission distance
Category-5 twisted pair with the maximum
transmission distance of 100 m (328.08 ft.)
Standards
z IEEE 802.3-2005
z IEEE 802.1D-2004
z IEEE 802.1Q-2003
z IEEE802.1X-2004