H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 2 Isolate-User-VLAN Configuration
2-4
III. Configuration procedure
The following are the configuration procedures for Device B and Device C.
1) Configure Device B
# Configure the isolate-user-VLAN.
<DeviceB> system-view
[DeviceB] vlan 5
[DeviceB-vlan5] isolate-user-vlan enable
[DeviceB-vlan5] port ethernet 2/0/5
[DeviceB-vlan5] quit
# Configure the secondary VLANs.
[DeviceB] vlan 3
[DeviceB-vlan3] port ethernet 2/0/1
[DeviceB-vlan3] quit
[DeviceB] vlan 2
[DeviceB-vlan2] port ethernet 2/0/2
[DeviceB-vlan2] quit
# Establish the mapping between the isolate-user-vlan and the secondary VLANs.
[DeviceB] isolate-user-vlan 5 secondary 2 to 3
2) Configure Device C
# Configure the isolate-user-vlan.
<DeviceC> system-view
[DeviceC] vlan 6
[DeviceC-vlan6] isolate-user-vlan enable
[DeviceC-vlan6] port ethernet 2/0/5
[DeviceC-vlan6] quit
# Configure the secondary VLANs.
[DeviceC] vlan 3
[DeviceC-vlan3] port ethernet 2/0/3
[DeviceC-vlan3] quit
[DeviceC] vlan 4
[DeviceC-vlan4] port ethernet 2/0/4
# Establish the mapping between the isolate-user-vlan and the secondary VLANs.
[DeviceC-vlan4] quit
[DeviceC] isolate-user-vlan 6 secondary 3 to 4
IV. Verification
# Display the isolate-user-vlan configuration on Device B.
[DeviceB] display isolate-user-vlan