H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 3 QoS Policy Configuration
3-3
Table 3-1 The form of the match-criteria argument
Form Description
acl
access-list-number
Specifies an ACL to match packets. The access-list-number
argument is in the range 2000 to 4999.
In a class configured with the operator and, the logical
relationship between rules defined in the referenced IPv4 ACL
is or.
acl ipv6
access-list-number
Specifies an IPv6 ACL to match IPv6 packets. The
access-list-number argument is in the range 2000 to 3999.
In a class configured with the operator and, the logical
relationship between rules defined in the referenced IPv6 ACL
is or.
any
Specifies to match all packets.
customer-dot1p
8021p-list
Specifies to match packets by 802.1p precedence of the
customer network. The 8021p-list argument is a list of CoS
values. You can provide up to eight space-separated CoS
values for this argument. CoS is in the range 0 to 7.
customer-vlan-id
vlan-id-list
Specifies to match the packets of specified VLANs of user
networks. The vlan-id-list argument specifies a list of VLAN
IDs, in the form of vlan-id to vlan-id or multiple discontinuous
VLAN IDs (separated by space). You can specify up to eight
VLAN IDs for this argument at a time. VLAN ID is in the range
1 to 4094.
In a class configured with the operator and, the logical
relationship between the customer VLAN IDs specified for the
customer-vlan-id keyword is or.
destination-mac
mac-address
Specifies to match the packets with a specified destination
MAC address.
dscp dscp-list
Specifies to match packets by DSCP precedence. The
dscp-list argument is a list of DSCP values. You can provide
up to eight space-separated DSCP values for this argument.
DSCP is in the range of 0 to 63.
ip-precedence
ip-precedence-list
Specifies to match packets by IP precedence. The
ip-precedence-list argument is a list of IP precedence values.
You can provide up to eight space-separated IP precedence
values for this argument. IP precedence is in the range 0 to 7.
protocol
protocol-name
Specifies to match the packets of a specified protocol. The
protocol-name argument can be IP or IPv6.
service-dot1p
8021p-list
Specifies to match packets by 802.1p precedence of the
service provider network. The 8021p-list argument is a list of
CoS values. You can provide up to eight space-separated
CoS values for this argument. CoS is in the range 0 to 7.