H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 3 QoS Policy Configuration
3-5
I. Configuration procedure
Follow these steps to define a traffic behavior:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a traffic behavior
and enter the
corresponding traffic
behavior view
traffic behavior
behavior-name
Required
behavior-name:
Behavior name.
This operation leads
you to traffic
behavior view
Configure accounting
action
accounting
Configure TP action
car cir
committed-information-rate
[ cbs committed-burst-size
[ ebs excess-burst-size ] ] [ pir
peak-information-rate ] [ green
action ] [ red action ] [ yellow
action ]
Configure traffic filtering
behavior
filter { deny | permit }
Configure traffic mirroring
action
mirror-to { cpu | interface
interface-type
interface-number }
Configure nested VLAN
tag action
nest top-most vlan-id vlan-id
Configure traffic redirect
action
redirect { cpu | interface
interface-type interface-number
| link-aggregation group
agg-id | next-hop { ipv4-add
[ ipv4-add ] | ipv6-add
[ interface-type
interface-number ] [ ipv6-add
[ interface-type
interface-number ] ] } }
Remark the customer
network VLAN ID for
packets
remark customer-vlan-id
vlan-id-value
Remark DSCP value for
packets
remark dscp dscp-value
Remark 802.1p priority for
packets
remark dot1p 8021p
Remark drop precedence
for packets
remark drop-precedence
drop-precedence-value
Required
You can configure
the traffic behavior
as required.