H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 3 QoS Policy Configuration
3-6
To do… Use the command… Remarks
Remark IP precedence for
packets
remark ip-precedence
ip-precedence-value
Remark local precedence
for packets
remark local-precedence
local-precedence
Remark the service
provider network VLAN ID
for packets
remark service-vlan-id
vlan-id-value
II. Configuration example
1) Network requirements
Create a traffic behavior named test, configuring TP action for it, with the CAR being
640 kbps.
2) Configuration procedure
# Enter system view.
<Sysname> system-view
# Create the traffic behavior (This operation leads you to traffic behavior view).
[Sysname] traffic behavior test
# Configure TP action for the traffic behavior.
[Sysname-behavior-test] car cir 640
3.2.4 Defining a Policy
A policy associates a class with a traffic behavior. Each traffic behavior is comprised of
a group of QoS actions. A device executes these QoS actions in the order they are
defined.
Follow these steps to associate a traffic behavior with a class:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a policy (This operation
leads you to policy view)
qos policy policy-name —
Specify the traffic behavior for
a class
classifier classifier-name
behavior behavior-name
Required