H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 7 VLAN Mapping Configuration
7-4
To do... Use the command... Remarks
Exit to system view
quit
—
Enter port view of the uplink port
interface interface-type
interface-number
—
Set the link type of the uplink
port to trunk
port link-type trunk
Required
Configure the current trunk port
to permit the specified SVLANs
to pass through
port trunk permit vlan
{ vlan-id-list | all }
Required
By default, a trunk
port permits only
VLAN 1 to pass
through.
Table 7-1 Configure a uplink policy
To do... Use the command... Remarks
Enter system view
system-view
—
Create a class and enter
class view
traffic classifier classifier-name
[ operator { and | or } ]
Required
Specify the CVLAN for the
VLAN mapping
if-match customer-vlan-id
vlan-id-value
Required
Exit to system view
quit
—
Create a traffic behavior and
enter traffic behavior view
traffic behavior behavior-name
Required
Specify the SVLAN for the
VLAN mapping
remark service-vlan-id
vlan-id-value
Required
Exit to system view
quit
—
Create a QoS policy and
enter QoS policy view
qos policy policy-name
Required
Map the CVLAN to the
SVLAN by associating the
traffic behavior with the class
classifier tcl-name behavior
behavior-name
Required
Exit to system view
quit
—
Table 7-2 Configure a downlink policy
To do... Use the command... Remarks
Enter system view
system-view
—
Create a class and enter
class view
traffic classifier classifier-name
[ operator { and | or } ]
Required