H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 3 Voice VLAN Configuration
3-6
To do... Use the command... Remarks
Enter system view
system-view
—
Enable the security mode
of a voice VLAN
voice vlan security
enable
Optional
Enabled by default
Configure the OUI
address of a voice VLAN
voice vlan mac-address
oui mask oui-mask
[ description text ]
Optional
By default, each voice
VLAN has default OUI
addresses configured.
Refer to
Table 3-1 for the
default OUI addresses of
different vendors.
Enable the global voice
VLAN feature
voice vlan vlan-id enable
Required
Enter Ethernet port view
interface interface-type
interface-number
—
Configure the working
mode as manual
undo voice vlan mode
auto
Required
Disabled by default
Access port
Refer to
Configuring an
Access-Port-Based
VLAN
.
Trunk port
Refer to
Configuring a
Trunk-Port-Based VLAN
.
Add the
ports in
manual
mode to the
voice VLAN
Hybrid port
Refer to
Configuring a
Hybrid-Port-Based VLAN
.
Select one of the three
operations listed.
After you add an access
port to a voice VLAN, the
voice VLAN becomes the
default VLAN of the port
automatically.
Trunk port
Refer to section
Configuring a
Trunk-Port-Based VLAN
Configure
the voice
VLAN as
the default
VLAN of
the port
Hybrid port
Refer to
Configuring a
Hybrid-Port-Based VLAN
.
Optional
This operation is required
if the input voice traffic is
untagged. If the input
voice traffic is tagged, the
voice VLAN cannot be
configured as the default
VLAN.
Enable the voice VLAN
feature on the port
voice vlan enable
Required