H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration
1-9
 Note:
The extended linkUp/linkDown Traps comprise the standard linkUp/linkDown Traps
defined in RFC plus interface description and interface type. If the extended messages
are not supported on NMS, you can disable this function and enable the device to send
standard linkUp/linkDown Traps.
1.5 Displaying and Maintaining SNMP
To do… Use the command… Remarks
Display SNMP-agent system
information, including the
contact, location, and version
of the SNMP
display snmp-agent sys-info
[ contact | location | version ]*
Display SNMP agent statistics
display snmp-agent statistics
Display the SNMP agent
engine ID
display snmp-agent
local-engineid
Display SNMP agent group
information
display snmp-agent group
[ group-name ]
Display the modules that can
send Traps and whether their
Trap sending is enabled or not
display snmp-agent trap-list
Display SNMP v3 agent user
information
display snmp-agent usm-user
[ engineid engineid | username
user-name | group group-name ] *
Display SNMP v1 or v2c agent
community information
display snmp-agent community
[ read | write ]
Display MIB view information
for an SNMP agent
display snmp-agent mib-view
[ exclude | include | viewname
view-name ]
Available in
any view
1.6 SNMP Configuration Example
I. Network requirements
z The NMS connects to the agent, a switch, through an Ethernet.
z The IP address of the NMS is 1.1.1.2/24.
z The IP address of VLAN interface on the switch is 1.1.1.1/24.
z NMS monitors and manages Agent using SNMPv2c. Agent reports errors or faults
to the NMS.