H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 2 RMON Configuration
2-6
To do… Use the command… Remarks
Display RMON history
information and the latest
history sampling information
display rmon history
[ interface-type
interface-number ]
Available in any view
Display RMON alarm
configuration information
display rmon alarm
[ entry-number ]
Available in any view
Display RMON prialarm
configuration information
display rmon prialarm
[ entry-number ]
Available in any view
Display RMON events
configuration information
display rmon event
[ entry-number ]
Available in any view
Display RMON event log
information
display rmon eventlog
[ event-number ]
Available in any view
2.4 RMON Configuration Example
I. Network requirements
Agent is connected to a configuration terminal through its console port and to a remote
NMS across the Internet.
Create an entry in the RMON Ethernet statistics table to gather statistics on Ethernet
2/0/1, and logging is enabled after received bytes exceed the specified threshold.
II. Network diagram
Figure 2-1 Network diagram for RMON (on a switch)
III. Configuration procedure
# Configure RMON to gather statistics for interface Ethernet 2/0/1.
<Sysname> system-view
[Sysname] interface Ethernet 2/0/1
[Sysname-Ethernet 2/0/1] rmon statistics 1 owner user1-rmon
[Sysname-Ethernet 2/0/1] return
# Display RMON statistics for interface Ethernet 2/0/1.
<Sysname> display rmon statistics Ethernet 2/0/1