H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 2 RMON Configuration
2-7
Statistics entry 1 owned by user1-rmon is VALID.
Interface : Ethernet2/0/1<ifIndex.3>
etherStatsOctets : 42615916 , etherStatsPkts : 410801
etherStatsBroadcastPkts : 322849 , etherStatsMulticastPkts : 81004
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 326772 , 65-127 : 50691 , 128-255 : 25871
256-511: 83 , 512-1023: 17 , 1024-1518: 7367
# Create an event to start logging after the event is triggered.
<Sysname> system-view
[Sysname] rmon event 1 log owner 1-rmon
# Configure an alarm group to sample received bytes on Ethernet 2/0/1. When the
received bytes exceed the upper or below the lower limit, logging is enabled.
[Sysname] rmon alarm 1 1.3.6.1.2.1.16.1.1.1.4.1 delta rising-threshold 1000
1 falling-threshold 100 1 owner 1-rmon
[Sysname] display rmon alarm 1
Alarm table 1 owned by 1-rmon is VALID.
Samples type : delta
Variable formula : 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
Sampling interval : 10(sec)
Rising threshold : 1000(linked with event 1)
Falling threshold : 100(linked with event 1)
When startup enables : risingOrFallingAlarm
Latest value : 2552