H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – VLAN

H3C S7500E Series Ethernet Switches Chapter 3 Voice VLAN Configuration

3-9

[DeviceA-Ethernet2/0/1] voice vlan enable

[DeviceA-Ethernet2/0/1] return

IV. Verification

# Display information about the OUI addresses, OUI address masks, and descriptive

strings.

<DeviceA> display voice vlan oui

Oui Address Mask Description

0001-e300-0000 ffff-ff00-0000 Siemens phone

0003-6b00-0000 ffff-ff00-0000 Cisco phone

0004-0d00-0000 ffff-ff00-0000 Avaya phone

0011-2200-0000 ffff-ff00-0000

0060-b900-0000 ffff-ff00-0000 Philips/NEC phone

00d0-1e00-0000 ffff-ff00-0000 Pingtel phone

00e0-7500-0000 ffff-ff00-0000 Polycom phone

00e0-bb00-0000 ffff-ff00-0000 3com phone

# Display the current Voice VLAN state.

<DeviceA> display voice vlan state

Voice VLAN status: ENABLE

Voice VLAN ID: 2

Voice VLAN security mode: Security

Voice VLAN aging time: 100 minutes

Voice VLAN enabled port and its mode:

PORT MODE

--------------------------------

Ethernet2/0/1 AUTO

3.4.2 A Configuration Example of Voice VLAN under Manual Mode

I. Network requirement

z Create VLAN 2 and configure it as a voice VLAN.

z IP phone type is untagged with the Hybrid port Ethernet 2/0/1 being the access

port.

z Ethernet 2/0/1 works in manual mode. It only allows voice packets with an OUI

address of 0011-2200-0000, a mask of ffff-ff00-0000, and a descriptive string of

test to be forwarded.