H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 2 FTP Configuration
2-9
To do… Use the command… Remarks
Specify the directory an
FTP user can access
work-directory
directory-name
Optional
By default, the FTP users
can access the root
directory of the device.
Set the priority level of the
FTP user
level level
Optional
0 by default
To upload files to an FTP
server, you need to set
the FTP user level to 3.
 Note:
If FTP server performs authentication, authorization and accounting (AAA) policy on
FTP client, AAA related parameters should be configured on the FTP server. For more
information about the local-user, password, service-type ftp, work-directory, and
level commands and the AAA related configuration, refer to AAA RADIUS
HWTACACS Configuration.
2.3.3 FTP Server Configuration Example
I. Network requirements
z Use your device as an FTP server. Create a user account for an FTP user on it,
setting the username to abc and the password to pwd, and setting the priority
level to 3.
z The IP address of the Ethernet interface is 1.1.1.1/16.
z The PC serves as the FTP client.
II. Network diagram
Figure 2-3 Smooth upgrading using the FTP server
III. Configuration procedure
1) Configure Switch (FTP Server)
# Create an FTP user account abc, setting its password to pwd, and setting the priority
level to 3.