H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500E Series Ethernet Switches Chapter 1 Information Center Configuration
1-6
II. Timestamp
Timestamp records the time when system information is generated to allow users to
check and identify system events.
Note that there is a space between the timestamp and sysname (host name) fields.
III. Sysname
Sysname is the system name of the current host. You can use the sysname command
to modify the system name. (Refer to System Maintaining and Debugging
Configuration for details.)
Note that there is a space between the sysname and module fields.
IV. Module
The module field represents the name of the module that generates system information.
You can enter the info-center source ? command in system view to view the module
list.
Refer to
Table 1-3 for module name and description.
Between “module” and “level” is a “/”.
V. Level (Severity)
System information can be divided into eight levels based on its severity, from 0 to 7.
Refer to
Table 1-1 for definition and description of these severity levels. Note that there
is a forward slash between the levels (severity) and digest fields.
VI. Digest
The digest field is a string of up to 32 characters, outlining the system information.
Note that there is a colon between the digest and content fields.
VII. Content
This field provides the content of the system information.
1.2 Configuring Information Center
1.2.1 Information Center Configuration Task List
Complete the following tasks to configure information center:
Task Remarks
Setting to Output System Information to the Console Optional
Setting to Output System Information to a Monitor Terminal Optional
Setting to Output System Information to a Log Host Optional