H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500E Series Ethernet Switches Chapter 1 Information Center Configuration
1-9
To do…
Use the
command…
Remarks
Enable the monitoring of
system information on the
console
terminal monitor
Optional
Enabled on the console and
disabled on the monitor
terminal by default.
Enable the display of
debugging information on
the console
terminal debugging
Required
Disabled by default
Enable the display of log
information on the
console
terminal logging
Optional
Enabled by default
Enable the display of trap
information on the
console
terminal trapping
Optional
Enabled by default
1.2.3 Setting to Output System Information to a Monitor Terminal
System information can also be output to a monitor terminal, which is a user terminal
that has login connections through the AUX, or VTY user interface.
I. Setting to output system information to a monitor terminal
To do… Use the command… Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 1-2 for
default channel names.
Configure the channel
through which system
information can be output
to a monitor terminal
info-center monitor
channel
{ channel-number |
channel-name }
Optional
System information is
output to the monitor
terminal by default with
channel 1 as the default
channel.