H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500E Series Ethernet Switches Chapter 1 Information Center Configuration
1-10
To do… Use the command… Remarks
Configure the output rules
of the system information
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
Optional
Refer to
Table 1-4 for the
default output rules of the
system information.
Configure the format of
the time stamp
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Optional
By default, the time stamp
format for log, trap and
debugging information is
date.
II. Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the
associated display function in order to display the output information on the monitor
terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do… Use the command… Remarks
Enable the monitoring of
system information on a
monitor terminal
terminal monitor
Required
Enabled on the console
and disabled on the
monitor terminal by default.
Enable the display of
debugging information on
a monitor terminal
terminal debugging
Required
Disabled by default
Enable the display of log
information on a monitor
terminal
terminal logging
Optional
Enabled by default
Enable the display of trap
information on a monitor
terminal
terminal trapping
Optional
Enabled by default