H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500E Series Ethernet Switches Chapter 1 Information Center Configuration
1-11
1.2.4 Setting to Output System Information to a Log Host
To do… Use the command… Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 1-2 for
default channel names.
Specify a log host and
configure the parameters
when system information
is output to the log host
info-center loghost
host-ip [ channel
{ channel-number |
channel-name } | facility
local-number ] *
Required
By default, the system
does not output
information to a log host. If
you specify to output
system information to a
log host, the system uses
channel 2 (loghost) by
default.
Configure the source
interface through which
log information can be
output to a log host
info-center loghost
source interface-type
interface-number
Optional
No source interface is
configured by default, and
the system selects an
interface as the source
interface.
Configure the output rules
of the system information
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
Optional
Refer to
Table 1-4 for the
default output rules of the
system information.
Configure the format of
the time stamp for log
information
info-center timestamp
loghost { date |
no-year-date | none }
Optional
date by default.
1.2.5 Setting to Output System Information to the Trap Buffer
To do… Use the command… Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default