H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500E Series Ethernet Switches Chapter 1 Information Center Configuration
1-13
To do… Use the command… Remarks
Configure the output rules
of the system information
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
Optional
Refer to
Table 1-4 for the
output rules of the system
information.
Configure the format of
the timestamp
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Optional
The time stamp format for
log, trap and debugging
information is date by
default.
1.2.7 Setting to Output System Information to the SNMP NMS
To do… Use the command… Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 1-2 for
default channel names.
Configure the channel
through which system
information can be output
to the SNMP NMS
info-center snmp
channel
{ channel-number |
channel-name }
Optional
By default, system
information is output to the
SNMP NMS through
channel 5 (known as
snmpagent).
Configure the output rules
of the system information
info-center source
{ module-name |
default } channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
Optional
Refer to
Table 1-4 for the
default output rules of the
system information.