H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Product Overview
H3C S7500E Series Ethernet Switches Chapter 3 Product Overview
3-2
SRPU
Chassis
LSQ1MP
UA0
LSQ1SRP2XB0
(Salience
VI-10GE)
LSQ1SRPB0
(Salience VI)
LSQ1SRP1CB0
(Salience
VI-Turbo)
S7510E No Yes Yes Yes
S7506E-V No Yes Yes Yes
 Note:
H3C S7500E series Ethernet switch is dual-SRPU system. The SRPUs in a chassis
must be of the same type.
3.3 Software Features
H3C S7500E series Ethernet switch provides abundant software features and can
meet the requirements of different applications.
Table 3-3 lists the software features
and the modules where software features are described.
Table 3-3 Software features of H3C S7500E series Ethernet switch
Module Software feature
01-Login
z Logging into a switch through the Console port
z Logging into a switch by using Telnet through an Ethernet
port
z Logging into a switch by using Modem through the Console
port
z Logging into a switch through NMS
02-VLAN
z IEEE 802.1Q-compliant Virtual Local Area Network (VLAN)
z Port-based VLAN
z Protocol-based VLAN
z IPv4-subnet-based VLAN
z Isolate-user-VLAN
z Voice VLAN
z GARP VLAN Registration Protocol (GVRP)
03-IP Address
and Performance
z Configuring an IP address for a switch
z Configuring TCP attributes for a switch
04-QinQ-BPDU
Tunneling
z QinQ
z BPDU Tunnel
05-Port
Correlation
Configuration
z Three port types: Access, Trunk, and Hybrid.
z Setting broadcast suppression ratio globally.
z Loopback detection
z Configuring port isolation group