H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 3 Device Management
3-1
Chapter 3 Device Management
When configuring device management, go to these sections for information you are
interested in:
z Device Management Overview
z Configuring Device Management
z Displaying and Maintaining Device Management Configuration
z Device Management Configuration Example
 Note:
File names in this document comply with the following rules:
z Path + file name (namely, a full file name): File on a specified path. A full file name
consists of 1 to 135 characters.
z “File name” (namely, only a file name without a path): File on the current working
path. The file name without a path consists of 1 to 91 characters.
3.1 Device Management Overview
Through the device management function, you can view the current working state of a
device, configure running parameters, and perform daily device maintenance and
management.
Currently, the following device management functions are available:
z Rebooting a Device
z Specifying a Boot ROM File for the Next Device Boot
z Upgrading Boot ROM
z Configuring a Detection Interval
z Configuring Temperature Alarm Thresholds for a Card
z Clearing the 16-bit Interface Indexes Not Used in the Current System
z Configuring the Traffic Forwarding Mode of SRPUs
z Configuring the Working Mode of EA LPUs
z Identifying and Diagnosing Pluggable Transceivers