H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 3 Device Management
3-14
# When the SRPUs of the device work in the active-standby mode, you need to
upgrade the program of the standby SRPU, specify it as the application program for the
next boot, and upgrade the Boot ROM file. If the standby SRPU is in slot 1, the
command is as follows:
<Device> copy aaa.app slot1#flash:/
<Device> boot-loader file slot1#flash:/aaa.app slot 1 main
<Device> bootrom update file slot1#flash:/aaa.app slot 1
# Reboot the device. The application program is upgraded now.
<Device> reboot