H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – HA
H3C S7500E Series Ethernet Switches Chapter 1 VRRP Configuration
1-28
Config Pri : 100 Run Pri : 100
Preempt Mode : YES Delay Time : 0
Auth Type : NONE
Virtual IP : 202.38.160.112
Master IP : 202.38.160.2
# Display detailed information of the standby group on Switch B.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Method : VIRTUAL-MAC
Virtual IP Ping : Enable
Interface : Vlan-interface2
VRID : 1 Adver. Timer : 1
Admin Status : UP State : Backup
Config Pri : 100 Run Pri : 100
Preempt Mode : YES Delay Time : 0
Auth Type : NONE
Virtual IP : 202.38.160.111
Master IP : 202.38.160.1
Interface : Vlan-interface2
VRID : 2 Adver. Timer : 1
Admin Status : UP State : Master
Config Pri : 110 Run Pri : 110
Preempt Mode : YES Delay Time : 0
Auth Type : NONE
Virtual IP : 202.38.160.112
Virtual MAC : 0000-5e00-0102
Master IP : 202.38.160.2
The above information indicates that in standby group 1 Switch A is the master, Switch
B is the backup and the host with the default gateway of 202.38.160.111/24 accesses
the Internet through Switch A; in standby group 2 Switch A is the backup, Switch B is
the master and the host with the default gateway of 202.38.160.112/24 accesses the
Internet through Switch B.
1.5 IPv6-Based VRRP Configuration Examples
This section provides these configuration examples:
z Single VRRP Standby Group Configuration Example
z VRRP Interface Tracking Configuration Example
z Multiple VRRP Standby Group Configuration Example