H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration
1-23
Figure 1-10 SSH client configuration interface (2)
From the window shown in
Figure 1-10, click Open. If the connection is normal, you will
be prompted to enter the username client002 to enter the configuration interface.
1.6 SSH Client Configuration Examples
1.6.1 When Using Password Authentication
I. Network requirements
z As shown in Figure 1-11, Switch A (the SSH client) needs to log on to Switch B
(the SSH server) through the SSH protocol.
z The username of the SSH client is client001 and the password is aabbcc.
Password authentication is required.
II. Network diagram
Figure 1-11 SSH client configuration (using password authentication)