H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches Chapter 2 IP Performance Configuration
2-1
Chapter 2 IP Performance Configuration
When configuring IP performance, go to these sections for information you are
interested in:
z IP Performance Overview
z Enabling Reception and Forwarding of Directed Broadcasts to a Directly
Connected Network
z Configuring TCP Attributes
z Configuring ICMP to Send Error Packets
z Displaying and Maintaining IP Performance
2.1 IP Performance Overview
In some network environments, you need to adjust the IP parameters to achieve best
network performance. IP performance configuration includes:
z Enabling the device to receive and forward directed broadcasts
z Configuring TCP timers
z Configuring the TCP buffer size
z Enabling ICMP error packets sending
2.2 Enabling Reception and Forwarding of Directed
Broadcasts to a Directly Connected Network
Directed broadcasts refer to broadcast packets sent to a specific network. In the
destination IP address of a directed broadcast, the network ID is a network-specific
number and the host ID is all ones. Enabling the device to receive and forward directed
broadcasts to a directly connected network will give hackers an opportunity to attack
the network. Therefore, the device is disabled from receiving and forwarding directed
broadcasts by default. You should however enable the feature when:
z Using the UDP Helper function to convert broadcasts to unicasts and forward
them to a specified server.
z Using the Wake on LAN function to forward directed broadcasts to a PC on the
remote network.
2.2.1 Enabling Reception of Directed Broadcasts to a Directly Connected
Network
If a device is enabled to receive directed broadcasts, the device will determine whether
to forward them according to the configuration on the outgoing interface.
Follow these steps to enable the device to receive directed broadcasts: