H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – RRPP
H3C S7500E Series Ethernet Switches Chapter 1 RRPP Configuration
1-16
[Sysname-GigabitEthernet3/0/1] link-delay 0
[Sysname-GigabitEthernet3/0/1] quit
[Sysname] interface gigabitethernet 3/0/2
[Sysname-GigabitEthernet3/0/2] link-delay 0
[Sysname-GigabitEthernet3/0/2] quit
[Sysname] interface gigabitethernet 3/0/4
[Sysname-GigabitEthernet3/0/4] link-delay 0
[Sysname-GigabitEthernet3/0/4] quit
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 4092
[Sysname-rrpp-domain1] ring 1 node-mode transit primary-port gigabitethernet
3/0/1 secondary-port gigabitethernet 3/0/2 level 0
[Sysname-rrpp-domain1] ring 2 node-mode assistant-edge common-port
gigabitethernet 3/0/2 edge-port gigabitethernet 3/0/4
[Sysname-rrpp-domain1] ring 1 enable
[Sysname-rrpp-domain1] ring 2 enable
[Sysname-rrpp-domain1] quit
[Sysname] rrpp enable
1.7 Displaying and Maintaining RRPP
To do… Use the command… Remarks
Display brief information
about RRPP configuration
display rrpp brief
Display detailed
information about RRPP
configuration
display rrpp verbose domain
domain-id [ ring ring-id ]
Display RRPP statistics
display rrpp statistics domain
domain-id [ ring ring-id ]
Available in any
view
Clear RRPP statistics
reset rrpp statistics domain
domain-id [ ring ring-id ]
Available in user
view
1.8 RRPP Typical Configuration Examples
This section covers these topics:
z Configuring Single Ring Topology
z Configuring Intersecting Ring Topology