H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – QinQ-BPDU Tunneling
H3C S7500E Series Ethernet Switches Chapter 1 QinQ Configuration
1-5
To do... Use the command... Remarks
Enter system view
system-view
—
Create a class and enter
class view
traffic classifier
classifier-name [ operator
{ and | or } ]
Required
By default, the
relationship between the
match criteria in a class is
logical AND.
Specify the inner VLAN
ID(s) of matching frames
if-match
customer-vlan-id
vlan-id-list
Required
Exit to system view
quit
—
Create a traffic behavior
and enter traffic behavior
view
traffic behavior
behavior-name
Required
Specify an outer VLAN ID
nest top-most vlan-id
vlan-id
Required
Exit to system view
quit
—
Create a QoS policy and
enter QoS policy view
qos policy policy-name
Required
Tag the frames that carry
a specified inner VLAN ID
with the specified outer
VLAN ID by associating
the traffic behavior with
the class
classifier classifier-name
behavior behavior-name
Required
Exit to system view
quit
—
Enter the Ethernet port
view of the customer
network-side port
interface interface-type
interface-number
—
Enable basic QinQ
qing enable
Required
Apply the QoS policy in
the inbound direction
qos apply policy
policy-name inbound
Required