H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 1 Logging into an Ethernet Switch
1-1
Chapter 1 Logging into an Ethernet Switch
When logging into an Ethernet switch, go to these sections for information you are
interested in:
z Logging into an Ethernet Switch
z Introduction to User Interface
1.1 Logging into an Ethernet Switch
You can log into an H3C S7500E series Ethernet switch in one of the following ways:
z Logging in locally through the Console port
z Telnetting locally or remotely to an Ethernet port
z Telnetting to the Console port using a modem
z Logging in through NMS (network management station)
1.2 Introduction to User Interface
1.2.1 Supported User Interfaces
H3C S7500E series Ethernet switch supports two types of user interfaces: AUX and
VTY.
Table 1-1 Description on user interface
User interface Applicable user Port used Description
AUX
Users logging in
through the Console
port
Console port
Each switch can
accommodate one
AUX user.
VTY
Telnet users and
SSH users
Ethernet port
Each switch can
accommodate up
to five VTY users.
 Note:
As the AUX port and the Console port of a H3C series switch are the same one, you will
be in the AUX user interface if you log in through this port.