H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 1 Logging into an Ethernet Switch
1-2
1.2.2 User Interface Number
Two kinds of user interface index exist: absolute user interface index and relative user
interface index.
1) The absolute user interface indexes are as follows:
z AUX user interface: 0
z VTY user interfaces: Numbered after AUX user interfaces and increases in the
step of 1
2) A relative user interface index can be obtained by appending a number to the
identifier of a user interface type. It is generated by user interface type. The
relative user interface indexes are as follows:
z AUX user interface: AUX 0
z VTY user interfaces: VTY 0, VTY 1, VTY 2, and so on.
1.2.3 Common User Interface Configuration
Follow these steps to perform common user interface configuration:
To do… Use the command… Remarks
Lock the current user
interface
lock
Optional
Execute this command in
user view.
A user interface is not
locked by default.
Specify to send messages
to all user interfaces/a
specified user interface
send { all | number | type
number }
Optional
Execute this command in
user view.
Disconnect a specified
user interface
free user-interface
[ type ] number
Optional
Execute this command in
user view.
Enter system view
system-view
—
Set the banner
header { incoming |
legal | login | shell |
motd } text
Optional
Set a system name for the
switch
sysname string
Optional
Enter user interface view
user-interface [ type ]
first-number
[ last-number ]
—
Define a shortcut key for
aborting tasks
escape-key { default |
character }
Optional
The default shortcut key
combination for aborting
tasks is < Ctrl + C >.