H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 1 Logging into an Ethernet Switch
1-3
To do… Use the command… Remarks
Set the history command
buffer size
history-command
max-size value
Optional
The default history
command buffer size is
10. That is, a history
command buffer can store
up to 10 commands by
default.
Set the timeout time for
the user interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout time
of a user interface is 10
minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated if
no operation is performed
in the user interface within
10 minutes.
You can use the
idle-timeout 0 command
to disable the timeout
function.
Set the maximum number
of lines the screen can
contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0
command to disable the
function to display
information in pages.
Make terminal services
available
shell
Optional
By default, terminal
services are available in
all user interfaces.
Set the display type of a
terminal
terminal type { ansi |
vt100 }
Optional
By default, the terminal
display type is ANSI. The
device must use the same
type of display as the
terminal. If the terminal
uses VT 100, the device
should also use VT 100.
Display the information
about the current user
interface/all user
interfaces
display users [ all ]
You can execute this
command in any view.