H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 2 Logging in Through the Console Port
2-2
After logging into a switch, you can perform configuration for AUX users. Refer to
Console Port Login Configuration for more.
2.2 Setting Up the Connection to the Console Port
z Connect the serial port of your PC/terminal to the Console port of the switch, as
shown in
Figure 2-1.
Figure 2-1 Diagram for setting the connection to the Console port
z If you use a PC to connect to the Console port, launch a terminal emulation utility
(such as Terminal in Windows 3.X or HyperTerminal in Windows 9X/Windows
2000/Windows XP) and perform the configuration shown in
Figure 2-2 through
Figure 2-4 for the connection to be created. Normally, the parameters of a terminal
are configured as those listed in
Table 2-1.
Figure 2-2 Create a connection