H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 2 Logging in Through the Console Port
2-3
Figure 2-3 Specify the port used to establish the connection
Figure 2-4 Set port parameters terminal window
z Turn on the switch. The user will be prompted to press the Enter key if the switch
successfully completes POST (power-on self test). The prompt (such as <H3C>)
appears after the user presses the Enter key.
z You can then configure the switch or check the information about the switch by
executing commands. You can also acquire help by type the ? character. Refer to
the following chapters for information about the commands.