H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 2 Logging in Through the Console Port
2-5
Configuration Description
Define a shortcut key
for aborting tasks
Optional
The default shortcut key combination for
aborting tasks is < Ctrl + C >.
Define a shortcut key
for starting terminal
sessions
Optional
By default, pressing Enter key starts the
terminal session.
Make terminal
services available
Optional
By default, terminal services are available in
all user interfaces
Set the maximum
number of lines the
screen can contain
Optional
By default, the screen can contain up to 24
lines.
Set history command
buffer size
Optional
By default, the history command buffer can
contain up to 10 commands.
Terminal
configuration
Set the timeout time
of a user interface
Optional
The default timeout time is 10 minutes.
Caution:
Changing of Console port configuration terminates the connection to the Console port.
To establish the connection again, you need to modify the configuration of the
termination emulation utility running on your PC accordingly. Refer to
Setting Up the
Connection to the Console Port
for more.
2.3.2 Console Port Login Configurations for Different Authentication Modes
Table 2-3 lists Console port login configurations for different authentication modes.
Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
Console port login
configuration
Description
None
Perform
common
configuration
Perform
common
configuration
for Console
port login
Optional
Refer to
Common
Configuration
for more.