H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 2 Logging in Through the Console Port
2-7
2.4 Console Port Login Configuration with Authentication
Mode Being None
2.4.1 Configuration Procedure
Follow these steps to perform Console port login configuration (with authentication
mode being none):
To do… Use the command… Remarks
Enter system view
system-view
—
Enter AUX user interface
view
user-interface aux 0
—
Configure not to
authenticate users
authentication-mode
none
Required
By default, users logging in
through the Console port are
not authenticated.
Set the
baud rate
speed speed-value
Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Set the
check mode
parity { even | mark |
none | odd | space }
Optional
By default, the check mode of
a Console port is set to none,
that is, no check bit.
Set the stop
bits
stopbits { 1 | 1.5 | 2 }
Optional
The stop bits of a Console
port is 1.
Configure
the
Console
port
Set the data
bits
databits { 5 | 6 | 7 | 8 }
Optional
The default data bits of a
Console port is 8.
Configure the command
level available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface.
Define a shortcut key for
starting terminal sessions
activation-key
character
Optional
By default, pressing Enter
key starts the terminal
session.
Define a shortcut key for
aborting tasks
escape-key { default |
character }
Optional
The default shortcut key
combination for aborting
tasks is < Ctrl + C >.