H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration
3-39
3.7.11 Configuring the Maximum Number of External LSAs in LSDB
Follow these steps to configure the maximum number of external LSAs in the Link State
Database:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id |
router-id router-id ] *
—
Specify the maximum
number of external LSAs
in the LSDB
lsdb-overflow-limit
number
Optional
No limitation by default
3.7.12 Making External Route Selection Rules Defined in RFC1583
Compatible
The selection of an external route from multiple LSAs defined in RFC2328 is different
from the one defined in RFC1583.
Follow these steps to make them compatible:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id |
router-id router-id ] *
Required
Make RFC1583
compatible
rfc1583 compatible
Optional
Compatible by default
3.7.13 Logging Neighbor State Changes
Follow these steps to enable the logging of neighbor state changes:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id |
router-id router-id ] *
—
Enable the logging of
neighbor state changes
log-peer-change
Optional
Enabled by default