H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration
3-40
3.7.14 Configuring OSPF Network Management
Follow these steps to configure OSPF network management:
To do… Use the command… Remarks
Enter system view
system-view
—
Bind OSPF MIB to an
OSPF process
ospf mib-binding process-id
Optional
The first OSPF
process is bound
with OSPF MIB by
default.
Enable OSPF trap
snmp-agent trap enable ospf
[ process-id ] [ ifauthfail | ifcfgerror |
ifrxbadpkt | ifstatechange |
iftxretransmit |
lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifcfgerror | virifauthfail |
virifrxbadpkt | virifstatechange |
viriftxretransmit |
virnbrstatechange ] *
Optional
Enabled by default
Enter OSPF view
ospf [ process-id | router-id
router-id ] *
—
Enable messages
logging
enable log [ config | error | state ]
Optional
Not enabled by
default