H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 4 IS-IS Configuration
4-18
z RFC 3786 - Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit
z RFC 3787 - Recommendations for Interoperable IP Networks using IS-IS
z RFC 3847 - Restart signaling for IS-IS
4.2 IS-IS Configuration Task List
Complete the following tasks to configure IS-IS:
Task Remarks
Configuring IS-IS Basic Functions Required
Specifying a Priority for IS-IS Optional
Configuring IS-IS Link Cost Required
Configuring the Maximum Number of Equal Cost
Routes
Optional
Configuring IS-IS Route Summarization Optional
Advertising a Default Route Optional
Configuring Inbound Route Filtering Optional
Configuring Route Redistribution Optional
Configurin
g IS-IS
Routing
Information
Control
Configuring IS-IS Route Leaking Optional
Configuring a DIS Priority for an Interface Optional
Configuring IS-IS Timers Optional
Disabling an Interface from Sending/Receiving IS-IS
Hello Packets
Optional
Configuring LSP Parameters Optional
Configuring SPF Parameters Optional
Configuring Dynamic Host Name Mapping Optional
Configuring IS-IS Authentication Optional
Configuring LSDB Overload Tag Optional
Logging the Adjacency Changes Optional
Enabling an Interface to Send Small Hello Packets Optional
Tuning and
Optimizing
IS-IS
Network
Enabling SNMP Trap Optional