H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 2 Logging in Through the Console Port
2-15
To do… Use the command… Remarks
Enter AUX user
interface view
user-interface aux 0
—
Configure to
authenticate users
locally or remotely
authentication-mode
scheme [ command-
authorization ]
Required
The specified AAA scheme
determines whether to authenticate
users locally or remotely.
Users are authenticated locally by
default.
Set the
baud
rate
speed speed-value
Optional
The default baud rate of the AUX
port (also the Console port) is
9,600 bps.
Set the
check
mode
parity { even | mark |
none | odd | space }
Optional
By default, the check mode of a
Console port is set to none, that is,
no check bit.
Set the
stop
bits
stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a Console
port is 1.
Configure
the
Console
port
Set the
data
bits
databits { 5 | 6 | 7 | 8 }
Optional
The default data bits of a Console
port is 8.
Configure the
command level
available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of level 3
are available to users logging into
the AUX user interface.
Define a shortcut
key for starting
terminal sessions
activation-key
character
Optional
By default, pressing Enter key
starts the terminal session.
Define a shortcut
key for aborting
tasks
escape-key { default |
character }
Optional
The default shortcut key
combination for aborting tasks is <
Ctrl + C >.
Make terminal
services available to
the user interface
shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum
number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.