H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv4 Routing

H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration

5-47

# Configure Switch C.

<SwitchC> system-view

[SwitchC] bgp 65009

[SwitchC-bgp] router-id 3.3.3.3

[SwitchC-bgp] peer 200.1.2.2 as-number 65008

[SwitchC-bgp] peer 9.1.1.1 as-number 65009

[SwitchC-bgp] network 9.1.1.0 255.255.255.0

[SwitchC-bgp] quit

# Display the routing table on Switch A.

[SwitchA] display bgp routing-table

Total Number of Routes: 3

BGP Local router ID is 1.1.1.1

Status codes: * - valid, > - best, d - damped,

h - history, i - internal, s - suppressed, S - Stale

Origin : i - IGP, e - EGP, ? - incomplete

Network NextHop MED LocPrf PrefVal Path/Ogn

*> 8.0.0.0 0.0.0.0 0 0 i

*> 9.1.1.0/24 200.1.1.1 0 0 65009i

* 200.1.2.1 0 0 65009i

Two routes to 9.1.1.0/24 are available, and the one with the next hop being 200.1.1.1 is

the optimal because the ID of Switch B is smaller.

3) Configure loading balancing

# Configure Switch A.

[SwitchA] bgp 65008

[SwitchA-bgp] balance 2

[SwitchA-bgp] quit