H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 3 Logging in Through Telnet
3-3
Configuration Remarks
Define a shortcut key for
aborting tasks
Optional
The default shortcut key combination
for aborting tasks is < Ctrl + C >.
Make terminal services
available
Optional
By default, terminal services are
available in all user interfaces
Set the maximum number
of lines the screen can
contain
Optional
By default, the screen can contain up
to 24 lines.
Set history command
buffer size
Optional
By default, the history command buffer
can contain up to 10 commands.
VTY terminal
configuration
Set the timeout time of a
user interface
Optional
The default timeout time is 10 minutes.
Caution:
z The auto-execute command command may cause you unable to perform common
configuration in the user interface, so use it with caution.
z Before executing the auto-execute command command and save your
configuration, make sure you can log into the switch in other modes and cancel the
configuration.
3.1.2 Telnet Configurations for Different Authentication Modes
Table 3-3 lists Telnet configurations for different authentication modes.
Table 3-3 Telnet configurations for different authentication modes
Authentication
mode
Telnet configuration Remarks
None
Perform
common
configuration
Perform
common Telnet
configuration
Optional
Refer to
Table 3-2.