H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 6 Routing Policy Configuration
6-9
6.4.4 Defining apply Clauses for the Routing Policy
Follow these steps to define apply clauses for a route-policy:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a routing policy
and enter its view
route-policy
route-policy-name
{ permit | deny } node
node-number
Required
Not created by default
Set AS_Path attribute for
BGP routes
apply as-path
as-number&<1-10>
[ replace ]
Optional
Not set by default
Specify a community list
according to which to
delete community
attributes of BGP routing
information
apply comm-list
comm-list-number delete
Optional
Not configured by default
Set community attribute
for BGP routes
apply community { none
| additive |
{ community-number&<1-
16> | aa:nn&<1-16> |
internet |
no-export-subconfed |
no-export |
no-advertise } *
[ additive ] }
Optional
Not set by default
Set a cost for routes apply cost [ + | - ] value
Optional
Not set by default
Set a cost type for routes
apply cost-type
[ external | internal |
type-1 | type-2 ]
Optional
Not set by default
Set the extended
community attribute for
BGP routes
apply extcommunity { rt
{ as-number:nn |
ip-address:nn } }&<1-16>
[ additive ]
Optional
Not set by default
Set a next hop for IPv4
routes
apply ip-address
next-hop ip-address
Optional
Not set by default
Redistribute routes to a
specified ISIS level
apply isis { level-1 |
level-1-2 | level-2 }
Optional
Not configured by default
Set a local preference for
BGP routes
apply local-preference
preference
Optional
Not set by default
Set an origin attribute for
BGP routes
apply origin { igp | egp
as-number | incomplete }
Optional
Not set by default