H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 6 Routing Policy Configuration
6-14
192.168.2.0/24 1 Type2 1 192.168.1.2 192.168.2.2
Total Nets: 5
Intra Area: 1 Inter Area: 0 ASE: 4 NSSA: 0
6.7 Troubleshooting Routing Policy Configuration
6.7.1 IPv4 Routing Information Filtering Failure
I. Symptom
Filtering routing information failed, while routing protocol runs normally.
II. Analysis
At least one item of the IP prefix list should be configured as permit mode, and at least
one node in the Route-policy should be configured as permit mode.
III. Processing procedure
1) Use the display ip ip-prefix command to display IP prefix list information.
2) Use the display route-policy command to display routing policy information.