H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 4 IPv6 IS-IS Configuration
4-4
 Note:
The ipv6 filter-policy export command, usually used in combination with the ipv6
import-route command, filters redistributed routes when advertising them to other
routers. If no protocol is specified, routes redistributed from all routing protocols are
filtered before advertisement. If a protocol is specified, only routes redistributed from
the routing protocol are filtered for advertisement.
4.4 Displaying and Maintaining IPv6 IS-IS
To do... Use the command... Remarks
Display brief IPv6 IS-IS
information
display isis brief
Available in any
view
Display the status of the
debug switches
display isis debug-switches
process-id
Available in any
view
Display IS-IS enabled
interface information
display isis interface
[ verbose ] process-id
Available in any
view
Display IS-IS license
information
display isis license
Available in any
view
Display LSDB information
display isis lsdb [ [ l1 | l2 |
level-1 | level-2 ] | [ [ lsp-id
lsp-id | lsp-name lspname |
local ] | verbose ] * ] *
[ process-id ]
Available in any
view
Display IS-IS mesh group
information
display isis mesh-group
[ process-id ]
Available in any
view
Display the mapping table
between the host name
and system ID
display isis name-table
[ process-id ]
Available in any
view
Display IS-IS neighbor
information
display isis peer [ verbose ]
[ process-id ]
Available in any
view
Display IPv6 IS-IS routing
information
display isis route ipv6
[ [ level-1 | level-2 ] | verbose ]
* [ process-id ]
Available in any
view
Display SPF log
information
display isis spf-log
[ process-id ]
Available in any
view
Display the statistics of
the IS-IS process
display isis statistics [ level-1
| level-2 | level-1-2 ]
[ process-id ]
Available in any
view
Clear all IS-IS data
structure information
reset isis all [ process-id ]
Available in user
view