H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration
5-8
5.4.2 Configuring IPv6 BGP Route Redistribution
Follow these steps to configure IPv6 BGP route redistribution and filtering:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family
view
ipv6-family —
Enable default route
redistribution into the IPv6
BGP routing table
default-route imported
Optional
Not enabled by default
Enable route
redistribution from
another routing protocol
import-route protocol
[ process-id ] [ med
med-value | route-policy
route-policy-name ]*
Required
Not enabled by default
 Note:
If the default-route imported command is not configured, using the import-route
command cannot redistribute any IGP default route.
5.4.3 Advertising a Default Route to a Peer/Peer Group
Follow these steps to configure to advertise default route to a peer/peer group:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
Required
Enter IPv6 address
family view
ipv6-family —
Advertise a default
route to a peer/peer
group
peer { ipv6-group-name |
ipv6-address }
default-route-advertise
[ route-policy route-policy-name ]
Required
Not advertised by
default